大乐透中1亿要倍投多少倍

Resin luminous adhesive

Current location: homepage > Product display > Resin luminous adhesive > Resin luminous adhesive >

Resin luminous adhesive

Author: Zhuo Li glue time: 2019-08-30 source: Dongguan Zhuo Yi Industrial Co., Ltd.

Resin luminous adhesive

The original price is.00 yuan.

Price: Zero element

Cargo number: 835AB

Product size: a set of 20KG

Commodity details Frequently asked questions ( Eight ) Order online


Zhuo Li is the world's most professional manufacturer of resin adhesives (outdoor super yellowing and advertising industry).

 

  Product introduction

 Luminous character hard glue 835AB


Product characteristics:

     This product is environment-friendly epoxy resin adhesive. It has good toughness, low viscosity, good leveling property and good defoaming property. It can be cured at room temperature or medium temperature and has moderate curing speed. The cured product has good toughness and softness, good transparency, smooth surface, no bubbles and strong adhesion. The curing agent has good solvent resistance, moisture resistance and waterproof performance.

 

Scope of application:

    Applicable to all kinds of LED Luminous characters, LED Module, LED Die bar, LED Lighting, stickers, trademarks, EVA/PVC The surface covering and sealing of products such as panel, tag, badge, handicraft and so on; the surface soft glue encapsulation of other products; the surface of the products needed to be dripping should be kept dry and clean; according to the ratio, the quantity should be taken and the weighing is accurate. Please remember that the ratio is the weight ratio but not the volume ratio. A , B The mixture should be well mixed to avoid incomplete solidification. After mixing, please pour glue in time and use the mixed glue as far as possible. During the curing process, please keep the product level so as not to spilt glue during curing.

 
 Matters needing attention
1, this product is recommended after mixing. glue Vacuuming and defoaming treatment is performed to exclude bubbles generated during the stirring process or to stand still. 10-20 The minutes are used again to make the bubbles produced during mixing time break away.

2. If the product is heated and solidified, the product can be placed for a period of time before entering the oven. If it is found that there are still bubbles on the surface, it can be removed by flame defoaming. The more the amount of glue is mixed, the faster the reaction will occur and the faster the curing speed will be. Please note that the amount of glue is controlled, because the time for using it will be shortened due to the faster reaction.

3, available time: refers to Twenty-five Temperature Under conditions, 100g The viscosity of the glue after mixing is doubled, not after operation time. , Glue must not be used.

4, a very small number of people exposed to glue for a long time will produce mild skin allergies, mild itching pain. It is recommended to wear protective gloves when they are used. They should be glued to the skin. Please use acetone or alcohol to wipe them off and use detergent to clean them. Before making a lot of use, please try a small amount and grasp the skills of the product so as to avoid mistakes.

 

 Undefined

 Description of resin luminous adhesive
 Undefined


    This product needs to be kept in a ventilated, cool and dry place for six months. The expiration date is qualified and can be used continuously. 20kg Which contains the main agent. 15kg/3 Pail and curing agent 5kg/ Barrels.

 
Note: The above performance data are humidity for the product. 70% , temperature Twenty-five The typical data of the test is only for reference when the customer is using, and can not fully guarantee all the data that can be achieved in a specific environment. When the customer is using, the measured data shall be the criterion.

 

 

  Product pictures
 Five

 Twenty-three

 

 Production process

 

 Resin luminous word production process
 

      Supply: Resin light-emitting adhesive, light-emitting adhesive, epoxy resin adhesive, epoxy resin adhesive, luminous character glue, light-emitting word technology, light-emitting word glue filling technology, light-emitting word color matching technology, luminous characters, color matching technology, light-emitting word matching technology, luminous character glue technology, non cracking resin luminous adhesive, winter fast drying light-emitting adhesive, resin AB adhesive, yellowing resin adhesive. Detailed inquiry: 400-107-9668

  Common problem
What is the reason why glue is sticky and not cured?

Answer: the glue must be in accordance with its ratio, and it is the proportion of electronic weighing. It can not be made according to volume ratio. Also, we need to see how the temperature is. If the temperature is too low, it is recommended to heat it up first. Twenty-five Stir again.  

 

Two, we do not vacuum equipment, how to defoaming?  

Answer: it doesn't matter if we don't have vacuum equipment. Our glue is naturally defoaming. After the glue is fully stirred, it remains at rest. 5-20 Minutes, you can automatically defoaming.

 

Three. Why has our glue been put on for seven days, and it hasn't been cured yet?  

Answer: if this product appears hard glue. Three Soft gum Seven It's not curing yet. One Please check the weight ratio first. Two The method of mixing is correct, because when the product is developed, environmental protection and safety problems are fully taken into consideration. The curing agent is water-based curing agent, which is as thin as water, so it must be stirred vigorously when stirring. Three If you can confirm it, you can confirm it. One and Two There is no problem, so this is the key, the glue ratio of one time. A Component +B The composition is best. Fifty Above, the ratio must be weighed electronically.  

 

Four, which component should be mixed before mixing?  

Answer: Please stir the product first. B Pour the glue into the blender and then pour it. A Glue.

 

Five, I still don't understand what to do.

A: then please contact us, Zhuo Li customer service. Twenty-four I am always at your service.

 

Six. What is the quality of your service?
We have a professional engineer, one to one 7*24 service telephone service, when the product is confirmed,

If it is express, order before 10 a.m., morning delivery, 3 p.m., 30 orders for shipment in the afternoon.

Urgent purchase of 3 thousand yuan, Dongguan city door-to-door + technical guidance, Guangdong province full of 1W door-to-door + technical guidance.  

The express delivery and logistics within 24 hours. We promise: the fastest delivery time is 1 hours, the slowest shipment is 24 hours!

 

  After-sale service
Payment and after sales service:

One The payment method of our company supports Alipay payment, or cash on delivery.

Two After shipment, our company has professional after-sale customer service personnel, for you to track the whole product in the way, so as to ensure that the product is safe and fast to the customer.   

Three We can enjoy the one-on-one all-around quality service of senior engineers for free, and give professional advice in the course of production operation. The company's professional engineers can also develop various products with different properties according to the requirements of customers, and make appropriate deployment in curing conditions, temperature tolerance, color, surface gloss, transparency, hardness and so on to meet different needs of customers.   

Four Our company promises that there will be any quality problems during normal operation. We will replace the goods unconditionally, and the freight charges will be borne by our company.

 

 

 Corporate image (factory and office) is up to date.

 

 



 Undefined
 

 

 Company profile (green style 2) 750x350

 Undefined

Related products

  • Application skills of two component super glue Release time: 2016-04-20 08:33:03

    Zhuo Li two component super glue, before filling the glue, it is better to prepare the pump (the glue is sold), and the gluing table is heated. Even if it does not stick to the hands after curing, it must be heated for 70 and a half hours. ...

  • How to clean up when the resin surface is dirty? Release time: 2016-01-15 10:07:34

    When the glue is left on the surface of the shell, the surface can be cleaned by acetone, water and vinegar. Or apply a release agent on the surface of the shell before pouring the glue. Choosing Zhuo Li release agent can solve the above problems.

  • Why is resin brightness not enough after lighting? Release time: 2016-01-15 10:07:22

    Because the brightness of the light source is different, or the amount of paste and homogenizer added is not appropriate.

  • The weather is cold and the glue surface is foggy. Release time: 2016-01-15 10:07:08

    The glue curing agent has poor moisture resistance and absorbs the moisture in the air during curing process, which will lead to the matte effect of the glue surface. ...

  • How to solve the problem of slow curing of glue in winter Release time: 2016-01-15 10:06:56

    The workshop can be equipped with heating or independent space heating devices, such as bath bullets, heating pipes, heating methods, etc. ...

  • What is the reason why the resin is yellow? Release time: 2016-01-15 10:06:41

    After curing, the resin absorbs the ultraviolet components of the sun, causing yellowing. The use of Zhuo Li resin adhesive, indoor to 3 years to 5 years without yellowing, outdoor for at least one year (even yellow will not be obvious). ...

  • The resin package is printed after being opened. Release time: 2016-01-15 10:06:14

    It is usually caused by cold, cold and incomplete curing. The choice of Zhuo Li epoxy adhesive can solve the above problems. ...

  • What causes resin cracking? Release time: 2016-01-15 10:05:39

    1. glue itself is specially designed to prevent the system. The adhesive power of 2 glue is too low. 3 glue hardens too fast and crisp. 4 glue has a relatively large shrinkage. ...


If you have any questions about this product, please ask questions.

Your name:
Contact information:
Contact mailbox:
Location:
Remarks:
    
Contact us
Contact
 Contact us
We really want to hear your voice.

400 Tel: 400-107-9668

Contact number: 0769-83203199 81066119

Fax:

Phone number: Thirteen billion nine hundred and twenty-five million seven hundred and forty-five thousand six hundred and fifty-eight

Customer service QQ: One hundred and fifty-four million three hundred and eighty-nine thousand eight hundred and thirty-nine

Email: Zhawu@cylsldy.cn

Address: No. 68 Shuikou Road, Shuikou industrial area, Dalang Town, Dongguan

[upward]  
Online Service

Online consultation

Online consultation

Online consultation

Telephone:
0769-83203199 81066119
 QR code

Focus on WeChat

下载星云娱乐斗地主 中彩网投注为什么不花钱 567彩票 下载 北斗棋牌全部版本 乐彩3d论坛手机17500 乐彩网17500双色球出球顺序 3d172前后关系 5933cc彩票在线 大乐透4+2几等奖 kg彩票如何选好